Matek FC-HUB Power Distribution Board 2-6S

This board takes power from 3 ~ 6S LiPo batteries and distributes them to 4 ESCs and also provides regulated and filtered DC 5V and DC 10V outputs. Cameras, RC receivers, Flight Controllers, Video Transmitters, LEDs etc. It also has a 184A current sensor and has an FFC socket to conveniently connect the MATEKSYS Flight Controller.

Features:

Total 4 pairs of ESC solder tabs fit X type frame
Max.27V input with TVS protection
Built-in current sensor 184A
PDB: 4 * 30A (4 * 46A, 5 seconds), 4 layers * 2 oz copper PCB
BEC 5V / 1.5A (2A Max.) W / 100uF panasonic POSCAP filter
BEC 10V / 1.5A (2A Max.) W / 47 uF TDK MLCC filter
5V and 10V Output LED indicators and Short circuit tolerant

current module

- Max.range 184A
- 3.3V ADC
- Scale output voltage to milliamps (1/10 mV/A): 179

BEC 5V output:

- Designed for RC Receivers, Flight controllers, OSD and Servos.
- DC/DC synchronous buck regulator.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 1.5 Amps (Max. 2.0A 10s/min)
- Short circuit tolerance (2 seconds/minute)

BEC 10V output:

- Designed for Video TX or FPV camera.
- Voltage: 10.0 +/- 0.2VDC
- Continuous current: 1.5 Amps (Max. 2.0A 10s/min)
- Short circuit tolerance (2 seconds/minute)
- 10V can be used to power cameras labeled 12V
- 3S LiPo input voltage should be 11V plus

- Mounting: 30.5 x 30.5 mm, Φ3 mm
- Dimensions: 36 x 46 x 4 mm
- Weight: 8.5g