Detaylı incelemek için çift tıklayın
Ürün Fiyatı
1.876,27 TL
Sık Sorulan Soruları Gör
Product description
An electronic speed controller (ESC) is required to operate any three-phase brushless motor, such as the thrusters and motors from Blue Robotics. This 30 amp ESC is sufficient for the T100 and T200 thrusters and runs the BLHeli_S firmware.
Main Features
Simple, robust brushless electronic speed controller
compact form factor
Forward/reverse rotation direction for forward/backward thrust
Customizable settings in an easy-to-use interface
High efficiency, low heat design optimized for minimal cooling environments
Features
| Parameter | value, worth | |
|---|---|---|
| Electricity | ||
| Voltage | 7-26 volts (2-6S) | |
| Maximum current (constant) | 30 amps (depending on cooling) | |
| Physically | ||
| Weight | 16.3g | 0.036 lb |
| Power Connectors | spade terminals for 6 screws | |
| Engine Connectors | Tinned wire ends | |
| signal connector | 3-pin servo connector (0.1” pitch) | |
| Pulse Width Signal | ||
| signal voltage | 3.3-5 volts | |
| Maximum Update Rate | 400Hz | |
| Stopped | 1500 microseconds | |
| Max forward | 1900 microseconds | |
| Max reverse | 1100 microseconds | |
| Signal Deadband | +/- 25 microseconds (centered around 1500 microseconds) | |
2D Drawings
Be the first to review this product!
